1. Remove any large accumulation of debris on the bottom with a leaf scoop.
2. Feed the pool with chlorine or other sanitizer to satisfy its requirements either manually or automatically.
3. Check that the water level is high enough for the pump to operate correctly.
4. Test and adjust sanitizer level (may require more frequent testing depending upon bather load and environmental conditions)
5. Visually inspect pool water for clarity, color, and visible contaminants
6. Remove floating leaves
7. Test and adjust pH (may require more frequent testing depending upon bather load and environmental conditions)
8. The pH should be in the range of 7.4 – 7.7 if the pool has a vinyl or tile finish. The range should be 7.3 -7.5 if the pool has a fiberglass finish. The range should be 7.4-7.6 for a gunite swimming pool. If the level is too high, then adjust it down using a pH decreaser. The correct dosage is located on the label.
9. If the pH is too low, then add a pH increaser. Again, see labels for dosage. If the pH has dropped, possibly so has your total alkalinity.
10. Don’t correct your pH more than once a week.
11. Test chlorine levels in the pool water:
12. Free chlorine levels should be between 1-3 ppm
· Free bromine levels should be between 3-5 ppm
13. Test and adjust Alkalinity
14. Test and adjust Oxidizer and Stabilizer levels
15. Clean the tile at the water line
16. Check filter pressure and backwash only if required
17. Check the water level and adjust as necessary at the prescribed rate of 1” (25mm) per hour
18. Add a preventative dose of algaecide as necessary
19. Shock the pool as per label instructions. This treatment restores the sparkle to the pool water and destroys germs and organic contaminants (can be done once every 2 weeks)
● Test and adjust Calcium Hardness
● Test and adjust for Total Dissolved Solids
● Test the total alkalinity, which should be in the range of 120-150 ppm.
● Chemically clean the filter.
● Visually inspect tile, sealant, and other exposed elements of the pool.
● Conduct Langelier Saturation Index evaluation and adjust as necessary
● Test your salt levels if you have a saltwater pool.
● If you have a vinyl liner – check for holes and tears and make any needed repairs as soon as possible.
● If you have a concrete, gunite, or fiberglass pool, check for cracks.
● Check the seals in your motor and pump.
Varies according to the project, requirements, and requested services & products
For more information, contact our support team at (number ).
At Splash, customer satisfaction is our priority! If you are not completely satisfied with any product, return it within 14 days in new/unused condition for a full product refund, excluding any shipping or handling.
Notes:
● Special return restrictions apply to some Splash brands. Please contact our customer support team for more details.
● Opened/installed pool liners, opened sanitization products, and installed pool accessories are NOT returnable.
To return your order, please contact our customer support team at (email address)
You can make a return for a full refund within 30 days for items that are in new, unused/unopened condition. Opened orders are not returnable.
If a defect is found during the warranty period, Splash will, at its discretion, repair or replace the defective item or part at no cost to the customer. The customer must follow Splash's warranty claim procedures to receive this warranty benefit. For more information, please visit our ٍSales Policy.
● Product Quality: Our pool products are built to withstand the harsh outdoor environment and maintain their functionality for an extended period.
● Performance: Our products effectively fulfill their intended purpose
● Safety: Our products comply with all applicable safety regulations and pose no risk to users
● Customer Support: Our employees are well-versed in the products they sell and provide accurate information and guidance to our customers.
● Warranty and Returns: We provide a clear and fair warranty process, and returns are handled efficiently with customer satisfaction as a priority.
● Compliance with Industry Standards: We should adhere to relevant industry standards and regulations for pool products, ensuring compliance with safety and quality requirements.
Splash offers its services and products all over Egypt. We have a wide network of sales branches and service centers across the country, ensuring that we can reach customers in every corner of Egypt, providing comprehensive support to our customers, from sales and installation to maintenance and repairs